Trace Aviation
Home
About Us
Our Services
Picture Gallery
Capabilities
Useful Information
What's New
FAQ
Contact Us
Trace Aviation
Inspection Frequencies and Tolerances

FREQUENCIES


Parts Type Frequency
Main Landing Gear Shock Absorber Inspect/Overhaul every 8,000 cycles or 6 years
Main Landing Gear Drag Brace Inspect/Overhaul every 8,000 cycles or 6 years
Main Landing Gear Axle and Torque Knees Inspect/Overhaul every 8,000 cycles or 6 years
Nose Landing Gear Shock Absorber Inspect/Overhaul every 8,000 cycles or 6 years
Nose Landing Gear Drag Brace Inspect/Overhaul every 8,000 cycles or 6 years
Landing Gear Motor Overhaul every 8,000 cycles or 6 years
Landing Gear Actuator End Play Check every 1,000 cycles or 30 months
Landing Gear Actuator Clevis Hole Inspect every 1,000 cycles
Main Landing Gear Torque Knee AD 2002-01-10 Inspect (if appl.) every 1,000 cycles or 2 years
Nose Landing Gear Axle and Fork AD 2004-23-02 Inspect (if appl.) every 200 hours

TOLERANCES

Phase Inspection:
A tolerance of 20 hours is allowed. Each phase inspection must be completed within 20 hours of the prescribed time.

Special Inspection Items- Calendar Date Limited:
A tolerance of 12 days per 12 calendar months is allowed, not to exceed a total of 60 calendar days.

Special Inspection Items- Flight Cycle Limited:
A tolerance to 10% is allowed.

Special Inspection Items – Hourly Limited:
A tolerance to 10% is allowed.
 
Overhaul and Replacement Items
No tolerance allowed




Back to Resources & Useful Information list

Home | About Us | Our Services | Picture Gallery | Capabilities | Useful Information | What's New | FAQ | Contact Us | Visit us on Facebook | Site Map |

© 2007 - 2057 Trace Aviation - Built and Powered by WSI.
This site is optimized for Internet Explorer 8 and Mozilla Firefox 3.6 or higher.
Please download an updated version now.